Rajendran

❖ Following the safety procedures and Their Implementation in Oil and Gas Offshore. ❖ Safe and smooth operation of static and rotatory equipment during process by maintaining the SOP. ❖ Handling of Pump, Compressor, Heat exchanger, Blower, Boiler, Incinerator, Reaction Furnace, Ejector, Sulfur Seal, Air cooler, Column, Stack, Vessel. ❖ Start-up of Compressor, pumps & smooth line up of FPSO/BARGE reaction furnace, incinerator, and steam & condensate service. ❖ Monitoring the process equipment condition. ❖ Receiving Instructions from control room operator and their follow up. ❖ Knowledge of pump change over and hand over activates and commissioning and pre-commissioning of it. ❖ Maintaining work place Safety in Oil and Gas Offshore.. ❖ Handled Highly Hazardous, Toxic and Flammable materials. ❖ Knowledge of firefighting during emergency. ❖ had excellent experience in scheduled Turn around jobs.

❖ Following the safety procedures and Their Implementation\ ❖ Safe and smooth operation of static and rotatory equipment during process by maintaining the SOP. ❖ Handling of Pump, Compressor, Heat exchanger, Blower, Boiler, Incinerator, Reaction Furnace, Ejector, Sulfur Seal, Air cooler, Column, Stack, Vessel. ❖ Start-up of Compressor, pumps & smooth line up of reaction furnace, incinerator, and steam & condensate service. ❖ Monitoring the process equipment condition. ❖ Receiving Instructions from control room operator and their follow up in Oil and Gas Offshore. ❖ Knowledge of pump change over FPSO/BARGE and hand over activates and commissioning and pre-commissioning of it. ❖ Maintaining work place Safety. ❖ Commissioning and pre commissioning activities in Sulfur Recovery Unit in Oil and Gas Offshore. ❖ Special experience of chemical cleaning 100% OXYGEN SERVICE piping and inspected all erection job. ❖ Inspected of hydro-test, pneumatic test, card-board blast, rotomal, pigging, air flushing, leak test and interties of erected piping. ❖ Catalyst Preservation and loading in Reactors. ❖ FPSO/BARGE Internal erection of Vessels, Reactors and Heat Exchangers. ❖ Refractory Dry Out of Reactors and Heat Exchangers in Oil and Gas Offshore. ❖ Process DRY-OUT with ALKALI BOIL-OUT of heat exchangers and steam generator drums. ❖ Stroke Checking and Hot loop checking of Control Valves. ❖ Having knowledge of Isometric and P&ID. ❖ Preparation of Loop flushing plan and Hydro test. ❖ No load trial of motors (Direction of rotation, vibration, MCMS) ❖ FPSO/BARGE Preservation and Passivation of equipment checked during field round. ❖ Prepare the field shift log sheet and inform any abnormality to the Shift superintendent. ❖ Report all near miss incidents regularly and give recommendation for improvements it necessary in Oil and Gas Offshore.

❖ FPSO/BARGE Chemical cleaning, pigging, flushing, hydro jetting ❖ Have good knowledge of Heater Treater, Separator, Bath heater, Water injection plant, Chemical dozing plant, Filtration plant, Back wash activity in field ❖ Have a good knowledge of line flushing, pigging, mechanical cleaning ❖ Safely operation Worked in zone o and one ❖ Have good knowledge of firefighting, oil storage area, heavy pump, ❖ I had attained mines vocational training in Oil and Gas Offshore. ❖ FIRE AND SAFETY EXPOSURE ❖ Experience and knowledge over Fire & Safety equipment and procedures, Good Housekeeping Practices. Familiar with all firefighting equipment and system. ❖ Good knowledge on process safety management system. ❖ Deluge Valve and Sprinkler system operation in Oil and Gas Offshore. ❖ Fire detection system, operation of fire hydrants & monitors. ❖ Expertise in handling of fire extinguishers like DCP and CO2. ❖ Good Knowledge in using PPE’s like SCBA, Online BA set. ❖ Acting as Emergency First Aid Coordinator of the Department. ❖ Oil and Gas Offshore Periodic Checkups of fire & safety equipment. FCC UNIT: Monitor and control operational performance of well-head platforms, satellites, water injection, gas treatment and power generation plant. Check the operation of the well-head platforms and the flowing injection status frequently through Experion displays; if a string has ceased to flow due to safety cabinet failure or any other reason, inform well-head team to initiate action to revive the string. FPSO/BARGE Constantly monitor levels of production and perform well flow tests as per schedule and adjust the injection well-head team to initiate action to revive the string.- Coordinate with well-head team to open/close wing valves, divert strings to FPSO/BARGE production/test header and to start/stop test separator and to carry out preventive maintenance; under instruction, open/closes strings to meet level of production. Coordinate with well-head team and satellite team while pigging water flow lines and depressuring / pressuring oil flow lines for rig requirement, liaise during main oil line pigging.