AKASH G

Conducted regular meetings and ensured that safe working conditions are maintained and safety practices are followed to prevent injury to personnel and damage to equipment in offshore. • Review technical data and P&ID drawings, PFD and executed review. Supervised and performed periodical test programs and monitor well performance in low/high pressure onshore, sweet /sour gas, oil & gas wells. • Verified the safety of well site operations in offshore and conduct daily well site walk around to check equipment rig up and compliance with work permits and JSAs. • Ensured all safety tools, procedures and processes are being utilized at the work site (JSA, Near Miss Observations, and Incident Reporting etc.)Well View, Permitting and Reporting Tasks • Ensured accurate, complete and timely regular reporting of daily operations within Well View including a time log of daily events in minimum 1/4 hour increments. • Reporting Non-productive Time (NPT) Tracking for all well work operations in Well View for all offshore and land operations. NPT is tracked in hours on the daily Well View report ( saved 96 hours in recent project). • Completed accurate cost tracking within Well View • Ensured well handover documentation has been completed for taking over the well and handing the well back to production operations. • Ensured permits are complete all permit requirement for work in offshore. • Reviewed and analyzed and proposed procedures for possible troubleshooting steps, practicality, efficiency, cost effectiveness, well productivity maintenance and improving and safe execution of operations. • Plan, schedule, executed and supervised services and materials for well work jobs • Implemented the procedure and supervise all critical phases of the work. • Collaborated with field and Well work Engineering personnel on job design and planning in offshore. • Advised the field Person In Charge of well work progress and activities. • Maintained daily communications with the Head of Well work Operations, Well Work Engineer and other shift supervisor to inform and consult about operations and major issues • Extensive personal skills portfolio attained and developed within the office and field operations environment, ‘front line’ experience handling every day, emergency, and critical operations in offshore. • Well Services, Upper and Lower completion,coordinating with Slickline, Coil Tubing, Workovers and abandonments. • Sand control , Gravel and Frac packs • Intelligent completions, liner hangers, SIT–FAT-EFAT subsea and surface trees, STT’s and supervise offshore. • Work overs, DST’s, abandonments, HPHT, EPF and smart completions, running screens, open hole gravel packs and single run and multi zone gravel packs. • Cleaning out tools, interventions, stimulation, knowledge of well integrity and snubbing. Intervention, fracking and stimulation including, CTU, fishing with CTU and HPHT. • Gun deployment, pumping ops and tree installation and maintenance, including instrumentation and pipe work, testing maintenance and training personnel. • Processing, opening wells, flowing connecting wells to open wells, well testing and data gathering, control room ops, testing flow lines and all aspects of production operations in offshore. • Service and maintenance of equipment and fault finding within hydraulic systems. • Involved with JSA, TRA preparation and auditing of personnel, procedures and equipment. • HSE focus is on the prevention of dropped objects safety while pressure testing equipment and barrier management. • A “can do” approaches combined with a sense of realism are hallmarks of my career to date, which include the ability to seek out and implement improvement suggestions at any available opportunity. • hecking all paper work and certification from contractors, and equipment checks, load outs and then going to well site and supervising the operations. • 2 HPHT well intervention project. • Cleaning out tools and acid treatment with coil tubing in offshore . • Checking equipment before load out. • Supervising load outs and once ready travel to rig, semi-submersible tender rig over a jacket template. • Completing 6 wells with stand-alone screens. • Two stage completions with weighted cesium/potassium formate brines for over pressured sandstone reservoirs. • Involved in Tree installation clean out tools and well testing, up to 150mmscf/day, and well plugging and capping. • Involved in Using Baker lower completion with sand control and Schlumberger upper completion. • Intervention, completion Supervisor. Clean out tools and acid treatment with Coil Tubing. • Preparing completion, Slickline and well test programs and equipment. • Operation supervised, high volume acid fracing, coil tubing, electric line, slick line, completions and work over. • Well testing and well head maintenance, in offshore oil wells with natural and artificial lift ESP, PCP with 6% H2S. • Program review, in charge of worksite, logistics, financial tracking, mentoring local engineers, HSE and rig camp. • All onshore planning for DST, well test and completion and program. • Supervising at well site for TCP/DST, Well Test, Completion and tree installation. • Completing tenders, scope of works, technical audit and acceptance of service companies, select equipment and personnel for a fishing, well investigation and well test campaign. • All aspects of Lower and Upper completion offshore and swamp, including Single run multi zone gravel packs, setting sump packer, tree installation, clean up and well tests. • Assisting local engineers on required programs.

( ONGC- Approved) (offshore) ( CAIRN -Approved)– leading and advising Major condensate stabilization projects/ Sand management system-15k Team handled: 6 sub-contracting companies and employees • Lead job plan meetings to make decisions regarding scope of work to be performed. • Actively monitored and maintained DATA Acquisition using FARDUX . • Maintained close influence with the area operations in offshore advisors, discipline managers, site operation engineers and teams, planning team and service providers (Contractors) to ensure day to day well site and emergency maintenance activities. • Proficient in Well engineering in offshore software and computer reporting. (EDM, DORT, FEKETE, FAEDUX Open Well, Excel etc.) • Review technical data and P&ID drawings and executed Coordinated Incident Management System (CIMS) review. Supervised and performed periodical test programs and monitor well performance in low/high pressure onshore, sweet /sour gas, oil & gas wells. • Supervised and maintained flow head, choke manifold 10K & 15 K, 3-Phase horizontal separator, sand trap and sand filters, SSV (surface safety valve) subsea and surface trees, STT’s, indirect heaters, ESD (emergency shutdown system). Artificial lifts like electrical submersible pumps, sucker rod pumps, progressive cavity pumps, beam gas compressors on low gas producing well, transfer pump, surge tank and gauge tanks etc. • Operated and tested well production range of 100 to 5,000 bbl/d with BS&W range of 0 to 100 % and API gravity range of 15 to 45 on mobile production separator. • Calibrated Dead weight testers, Senior Orifice meter Daniel, Pressure controllers, pressure test pumps, Level controllers, Pressure and level actuators, Safety relief valves, Flow computer, differential chart recorders Barton, oil and gas flow meters, chemical injection, API kit, salinity kit, etc. • Analyzed standard methods for water cut analysis, API gravity analysis, Gas gravity analysis, Salinity analysis, pH . • Good knowledge of development and implementation of safe operating procedures. • Monitored and reported using Data Acquisition System. • Member of the Field Incident Management Team (IMT) as Command Staff to provide advice to the (Incident Commander) on strategic & tactical response during an emergency and also responsible for the management & upkeep of the Incident Command Centre (ICC) in field. • Takes responsibility for achieving challenging HSE goals, understanding the oil and gas business. • Exicuted FAT /SAT analysis activities in oil and gas process equipements enshured PSM, also enshure Material team for on time availability of material and ensure sufficient inventory levels. • Coordinating equipment and personnel for operational requirements. • Witnessing Subsea SIT, FAT, EFAT, attending and advising on required programs. • Program and Well Services procedure writing • Implementing and developing their Well Integrity Management System . • Working flexibly to accommodate the changing needs of the business; working long hours and taking on additional responsibility. • Dealing efficiently and on own initiative with a high-volume workload. • Complying with all relevant procedures and deliver high standards of safety performance during all operations. • Responding promptly and effectively to changing circumstances, planning for contingencies and managing conflicting priorities. • Supporting in all elements of health, safety, security and environmental aspect for the organisation. • Well site coordination and company rep on the rig. • Planning of equipment, screens, gravel packs, assemblies, acid jobs etc. and mobilization, • Tree installation and replacement. • Ensuring personnel were available and in country. • Supervising all service and drilling personnel on the rig for clean out tools, completion and then on to opening up, clean up and well handing over to production. • All further required intervention operations and well abandonments. • Chaired pre job and end off job meetings. • Promoting HSE and EMS and ensure everyone follows the company policies. • Familiar with the permit to work system and like to implement a good safety culture throughout site. • Excellent communication skills at all levels while remaining dedicated to ensuring and understanding the company requirements and procedures. • Completing all activities in a timely accurate and efficient manner in accordance with procedures and work instructions. • Monitoring day-to-day activity and quality levels. • Supporting and improving team performance by sharing knowledge and best practices. • Implementing and supporting effective working practices and systems as required to continuously improve product delivery. • Ensuring quality assurance of all work scopes is maintained, and all work is performed in accordance with company policies and the Health and Safety at work act. • Approve PTW and evaluate (OCL) occupational exposure limit, (LEL) Lowest explosion limit, (LOTO) lock out and tag out (NORM) normally occurring radioactive materials, their hazard study and control measures, (RAM) risk assessment management, personal safety management system also in (ALARP) as low as reasonably practicable. (SIMOPS) Simultaneous operation and management system • Effectively receive guidance and feedback. • Supervised and performed periodical test programs and monitor well performance in low,high pressure onshore, offshore, sweet ,sour gas in oil & gas wells.

Experienced in PM maintenance of all types of pumps such as centrifugal, reciprocating & rotary pumps, Gas loading arms, sand separator, choke manifold, sacrifices manifold, denial orifice, LCV, PCV,SDV, BOP, SSSV,Wing valve, chemical injection in offshore. • Inspect the condition of rotating parts namely shaft, sleeve, impeller, oil deflectors, wear rings, bearings, coupling and stationary parts such as casing stuffing box, distance pieces and bearing housing. • Over hauling of reciprocating pump such as plunger pump & diaphragm pump including renewal of plunger packing, oil seals, suction discharge valves checking & servicing in offshore. Safety apparatus Handled: • Handled (BF25) (I-BRID) infra-red gas detector for continuous gas monitoring, (MX6) methane gas detector, escape set, parrot mask, SCBA- Self-contained breathing apparatus for handling critical jobs ,live line to work long time in H2s.