AJEESH JOHN M P

● FOLLOW PROJECTS HSE REQUIREMENTS AS PER THE SITE ACTIVITIES. ● APPLY WMS FOR SITE ACTIVITIES AND IMPLEMENT ALL THE PRECAUTIONS AS PER THE APPROVED JSA AND FRA, PROVIDE TBT, BARRICAEDS, SIGNAGES ETC. ● COORDINATE WITH WMS COORDINATOR TO ENSURE ALL THE ACTIVITIES ARE CAPTURED IN THE PERMITS. ● FOLLOW ADNOC LIFE SAVING RULES. ● EXECUTE CONSTRUCTION ACTIVITIES AS PER THE APPROVED AFC DRAWINS. ● PREPARE DAILY PROGRESS REPORT AND SUBMIITED TO DISCIPLINE ENGINEER ● REQUESTING ENGINNER TO PROVIDE REQUIRED MATERIALS, TOOLS AND EQUIPMENTS AS PER THE PLANNED ACTIVTIES ON THE PRIORITY BASIS. ● CAPABLE OF ELECTRICAL & INSTRUMENTATION CONSTRUCTION DRAWINGS, INSTRUMENT LOOP DIAGRAMS, GENERAL ARRANGEMENTS DIAGRAMS AND OPERATION PROCEDURES FOR THE PERMIT SYSTEMS ETC. ● ASSIGNMENT OF ACTIVITIES TO WORKERS (FOREMAN, JOB PERFORMER AND TECHNICIANS) ● INSTALLATION OF INSTRUMENTS SUCH AS THE GAS DETECTOR, FLAME DETECTOR, PRESSURE TRANSMITTER, TEMPARATURE TRANSMITTER, FLOW TRANSMITTER, SHUTDOWN VALVE, FLOW CONTROL VALVE, MOTOR OPERATING VALVE, INSTRUMENT INSTALLATION IN WELL HEAD AND IVC AREA ETC. ● TUBING FOR INSTRUMENT PRESSURE AND FLOW TRANSMITTER ● TRANSFORMER OIL FILLING AND CURING FOR THE TRASFORMER & TRANFORMER INSTALLATION. ● AIR COMPRESURE & NITROJEN COMPRESOR INSTALLATION AND GLANDING AND TERMINATION FOR THE UNIT. ● CATHODIC PROTECTION TRANSFORMER INSTALLATION AND JB INSTALLATION FOR THE CATHODIC PROTECTION ● CATHODIC PROTECTION INSTALLATION FOR THE WELL CAUSE. ● SOUNDER, BECAN INSTALLATION INSTALATION & GLANDING AND TERMINATION FOR THE DEVICES. ● TUBING FOR THE WELLHEAD CONTROL PANEL. ● E&I CALES LAYING ● E&I GLANDING AND TERMINATION, EARTH RESISTANCE TEST, E&I CABLE CONTINUITY TEST ETC. ● SOLAR PANEL INSTALLATION AND LOAD TESTING. ● CABLE GLANDING AND TERMINATION FOR WELL HEAD CONTROL PANEL ● PANEL INSTALLATION FOR ETR&ITR, CATHODIC PROTECTION FOR PIPELINES. ● DEEP EARTH DRILLING FOR EARTING AND GROUNDING. ● LIGHTING CABLE LAYING AND GLANDING AND TERMINATION. ● LIGHT INSTALLATON FOR PLATS AND HUB ● SOLAR PANEL INSTALLATION, WIRING, COMMISSIONING ● PREPARE AND ASSEMBLE CONDUITS AND CONNECT WIRING THROUGH THEM ● PREVENT BREAKDOWN OF SYSTEMS BY ROUTINELY INSPECTING AND REPLACING OLD WIRING AND INSULATED CABLES, CLEANING CIRCUITS ETC. ● PERFORM EFFECTIVE TROUBLESHOOTING TO IDENTIFY HAZARDS OR MALFUNCTIONS AND REPAIR OR SUBSTITUTE DAMAGED UNITS. ● ANODE & TEST POST INSTALLATION FOR FLOW LINE, FBB BOX, PCR BOX INSTALLATION. ● PIN BRAZING FOR THE EXISTING FLOW LINE.